Flat pack chin cage appx 24x22.5x35.25”tall
Click to enlarge
6 shelves are included but not shown (the second door on pic is an extra)
FLAT PACK CAGES ARE NOT SUITABLE FOR FRONT WEIGHT SUPPORTS
Flat pack chin cage appx 24x22.5x35.25"tall
1 large door
fixed hay rack
slide out under mesh cleaning tray
6 wood shelves
MESH MIDDLE LEVELS CAN BE SUPPLIED WITH A CORNER CUT OUT FOR ACCESS.THIS REDUCES FALLING DISTANCES WITH TALLER CAGES AND DOUBLES FLOOR AREAS
As there are no side doors in my flat pack cages for shelf changing, it is advisable to try and position any middle mesh level so as to try to allow access for changing any of the longer shelves as required.
THIS CAGE WOULD ALSO REQUIRE AN EXTRA DOOR IF USING A MESH LEVEL
(PLEASE REFER TO 'MESH LEVEL' IN CAGE ACESSORIES FOR PRICE AND IF ORDERING***)
pic shows cage without shelving.
Pic shows a second door (as an extra)
As these cages are folded down to save expensive carriage charges, they require the use of a pair of pliers and a screwdriver for assembly.
Each cage comes complete with sufficient 'C' clips for assembly.
Carefully unfold the cage and stand it the correct way up (that is with the hay rack at the top). Steadily shake the cage so the base falls into place then fold the top into position.
Due to the majority of the cage being already assembled, all you are required to do is secure with 'C' clips (using pliers). The top and base: a clip is required approx. every 5 or 6 squares of the mesh. If using pliers, insert the 'C' clip into the circular part of the pliers and squeeze it to form a circular clip to hold the wires together.
Then with the use of a screwdriver, insert the wooden shelves where required with the washer on the outside of the wire cage. (All fixings supplied)
Your new cage should now be secure and complete, attach the feed pot by bending the tags around the wires where you require it and slide in the cleaning tray.